FujiFilm Finepix JX500 Series Owner's Manual page 104

Problems and Solutions
Connections/Miscellaneous
Problem Problem
No picture or sound. No picture or sound.
No color No color
The computer does not The computer does not
recognize the camera. recognize the camera.
Pictures can not be Pictures can not be
printed. printed.
Only one copy is printed/ Only one copy is printed/
the date is not printed. the date is not printed.
The camera is unre- The camera is unre-
sponsive. sponsive.
The camera does not The camera does not
function as expected. function as expected.
No sound. No sound.
Date and time added by Date and time added by
S DATE STAMP S
DATE STAMP
are not correct. are not correct.
Date and time are added Date and time are added
to the pictures. to the pictures.
FinePixViewer can not be FinePixViewer can not be
installed or run. installed or run.
90
• • The camera is not properly connected The camera is not properly connected: Connect the camera properly (
• • An A/V cable was connected during movie playback An A/V cable was connected during movie playback: Connect the camera once movie playback has ended.
• • Input on the television is set to "TV" Input on the television is set to "TV": Set input to "VIDEO".
• • The camera is not set to the correct video standard The camera is not set to the correct video standard: Match the camera
TEM setting to the TV ( TEM setting to the TV (P
• • The volume on the TV is too low The volume on the TV is too low: Adjust the volume.
Match the camera Match the camera Q Q VIDEO SYSTEM VIDEO SYSTEM setting to the TV (
Be sure the camera and computer are correctly connected (P Be sure the camera and computer are correctly connected (
• • The camera is not properly connected The camera is not properly connected: Connect the camera correctly (
• • The printer is off The printer is off: Turn the printer on. : Turn the printer on.
The printer is not PictBridge compatible. The printer is not PictBridge compatible.
• • Temporary camera malfunction Temporary camera malfunction: Remove and reinsert the battery (
• • The battery is exhausted The battery is exhausted: Charge the battery (
Remove and reinsert the battery ( Remove and reinsert the battery (P
Turn silent mode off (P Turn silent mode off ( P 75). 75).
The camera clock is not correctly set: Reset the date and time ( The camera clock is not correctly set
T T + + U U or or T T is selected for is selected for S
can not be deleted from the pictures. To take pictures without date and time, select can not be deleted from the pictures. To take pictures without date and time, select OFF
S S DATE STAMP P 81).
DATE STAMP ( (P
FinePixViewer does not support Mac OS X 10.7 or later. Use the application supplied with Mac OS X FinePixViewer does not support Mac OS X 10.7 or later. Use the application supplied with Mac OS X
P 56).
or third-party software (P or third-party software (
Solution Solution
: Connect the camera properly (P
: Connect the camera once movie playback has ended.
: Set input to "VIDEO".
P 81). 81).
: Adjust the volume.
setting to the TV (P
: Connect the camera correctly (P
: Remove and reinsert the battery (P
P 11) or insert a fully-charged spare battery (
: Charge the battery (P 11) or insert a fully-charged spare battery (P
P 6). If the problem persists, contact your FUJIFILM dealer.
6). If the problem persists, contact your FUJIFILM dealer.
: Reset the date and time (P
S DATE STAMP
DATE STAMP option
81).
56).
P 49).
49).
: Match the camera Q Q VIDEO SYS- VIDEO SYS-
P 81).
81).
P 58).
58).
P 50). 50).
P 6). 6).
P 15).
15).
option: Added shooting date and time : Added shooting date and time
Troubleshooting
P 6). 6).
OFF for for