Table of Contents
Advertisement
J AE BKT EV STEPS
AE BKT EV STEPS
J
Choose the size of the exposure bracketing incre-
ment used when O (AE bracketing) is selected in
continuous shooting mode (P 45).
Choose from increments of ±
±1 EV (note that the camera may not be able to
use the selected bracketing increment if the
amount of over- or under- exposure exceeds the
limits of the exposure metering system).
I FLASH
FLASH
I
Adjust flash brightness. Choose from values be-
tween +
EV and –
EV. The default setting is ±0.
2
/
2
/
3
3
Note that the desired results may not be achieved
depending on shooting conditions and the dis-
tance to the subject.
[±
[±
] ]
g EXTERNAL FLASH
/
g
1
3
Choose ON when using an optional flash unit (ex-
cept Fujifilm products) mounted on the camera
hot shoe.
1
/
EV, ±
2
/
EV, and
3
3
c
• The flash may not fully light the subject at speeds
faster than
• Use auto or custom white balance (P 52).
• If the built-in flash is raised when ON is selected for
g EXTERNAL FLASH, the built-in flash will fire once
[±0]
[±0]
to provide a signal for the optional flash unit to fire.
• External flash units can be used in P, S, A, M or O
(S and T only) modes.
• Fujifilm external flash units do not require this setting.
a
• The camera can be used with flash units that provide
aperture adjustment, external metering, and sensitiv-
ity control. Some flash units that are designed spe-
cifically for other cameras can not be used.
• For information on Fujifilm external flash units, see
Accessories from FUJIFILM (P 108).
Using the Menus: Shooting Mode
EXTERNAL FLASH
1
/
s.
1000
[OFF]
[OFF]
89
Advertisement
Table of Contents
