Advertisement
removing Your zūmo from Either Mount
1. Press the button on the side of the mount to release the zūmo.
2. Lift out the zūmo.
3. Place the weather cap on the cradle (motorcycle mount only).
Connecting the gXM 40 antenna
Do not place the GXM 40 antenna on the fuel tank or in any location where it may come into
contact with fuel or excessive heat.
1. With the zūmo placed in the motorcycle mount, remove the weather cap from the mini-USB
connector on the Power cable.
2. Plug the GXM 40 antenna into the mini-USB connector.
3. Place the GXM 40 antenna within clear view of the sky in an area where there is at least 10
cm between the antenna and your zūmo. For best performance, place the GXM 40 antenna
at least 30 cm away from the zūmo.
Note: The GXM 40 antenna can also be placed in an area covered by a non-conductive
material; such as a fiberglass top-case, tank bag, or leather saddlebag.
Mounting Your zūmo in an automobile
See the Important Safety and Product Information guide in the product box for product
warnings and other important information.
This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when exiting or store it out of direct sunlight.
1. Plug the automotive power cable into the connector on the right side of the cradle.
Microphone
jack (2.5 mm)
Cradle
Release button
Power
cable
notice
WarnIng
Release button
Cradle
Automotive
power cable
Advertisement
