Dell PowerEdge 2970 Information Update page 14

Table 1-5. Front-Panel LED Indicators, Buttons, and Connectors (continued)
Item Indicator, Button,
or Connector
2 NMI button
System
3
identification
button
4 LCD panel
5 USB connectors
(2)
14
Information Update
Icon Description
Used to troubleshoot software and device
driver errors when using certain operating
systems. This button can be pressed using
the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
operating system's documentation.
The identification buttons on the front
and back panels can be used to locate a
particular system within a rack. When
one of these buttons is pushed, the LCD
panel on the front and the blue system
status indicator on the back blink until
one of the buttons is pushed again.
Provides system ID, status information,
and system error messages.
The LCD lights during normal system
operation. Both the systems management
software and the identification buttons
located on the front and back of the
system can cause the LCD to flash blue
to identify a particular system.
The LCD lights amber when the system
needs attention, and the LCD panel
displays an error code followed by
descriptive text.
NOTE:
If the system is connected to AC
power and an error has been detected, the
LCD lights amber regardless of whether the
system has been powered on.
Connects USB 2.0-compliant devices
to the system.