Using The Remote Control - Optoma HD700X User Manual

User Controls
Remote Control
English
8

Using the Remote Control

Power
Mode
16:9
Native
Contrast
Menu
Re-Sync
D-Sub
Video
Source Lock
S-Video
YPbPr
HDMI
Source
Refer to the "Power On/Off the Projector"
section on pages 13-14.
Select the display mode from Cinema,
Bright, TV, Photo and User.
Scale the image at a 16:9 aspect ratio.
The input source will be displayed without
scaling.
Control the degree of difference between
the lightest and darkest parts of the pic-
ture.
Press "Menu" to launch the on-screen
display (OSD) menu. To exit OSD, Press
"Menu" again.
Automatically synchronizes the projector
to the input source.
Press "D-Sub" to choose D-Sub (15 pins)
connector source.
Press "Video" to choose Composite video
source.
Select auto detection all connector ports or
lock current connector port.
Press "S-Video" to choose S-Video source.
Press "YPbPr" to choose Component video
source.
Press "HDMI" to choose source from
HDMI connector.
Press "Source" to select the input signal
source at the next terminal.