BenQ MX660P series User Manual Addendum

Addendum_NewFW_MX615+_MX660P.fm Page 1 Monday, January 17, 2011 1:28 PM
BenQ User Manual Addendum
Addition information on the MX615+ and MX660P series
Please refer to the user manual and quick start guide of the MX615 for detailed information and
instructions.
Using the Web Control Lock
This function is designed to prevent unauthorized people from maliciously changing the projector
settings through the Projector Network Display System.
To enable the function:
1. After your computer is connected to the projector, enter the address of the projector in the
address bar of your browser and press Enter.
2. Go to the Admin page of the Projector Network Display System.
3. Enter the current password.
4. Click ON in the Web Control Lock row.
The next time someone connects to this projector, the Projector Network Display System page
provides limited functions.
To disable the function:
1. Go to the Admin page of the Projector Network Display System.
2. Enter the current password.
3. Click OFF in the Web Control Lock row.
You can also use the OSD menu to toggle this function:
1. Go to the SYSTEM SETUP: Advanced > Security Settings > Change Security Settings menu after
opening the OSD menu system. Press MODE/ENTER. The message "INPUT PASSWORD"
appears. Enter the current password.
2. If the password is correct, the OSD menu returns to the Security Settings page. Press
highlight Web Control Lock and press
Using the Projection Login Code
This function is designed to ensure network display through the correct projector. To toggle this
function:
1. Go to the SYSTEM SETUP: Advanced > Network Settings menu after opening the OSD menu
system. Press MODE/ENTER.
2. Press to highlight Projection Log In Code and press
When this function is on, the projector generates a random 4-digit code in the upper right corner
when you switch the source to Network Display. You need to key in this 4-digit code in the Q Presenter
when connecting to the projector.
Additional information on watching 3D contents on a BenQ projector
• The following timing does not support 3D function:
Resolution Mode
640 x 480 VGA_60*
• The projector supports Frame Sequential and Top-Bottom 3D formats. Therefore the settings
under the 3D Sync menu now are as follows: Off, Top-Bottom and Frame Sequential.
/ to select On or Off.
Vertical Frequency Horizontal Frequency
(Hz)
59.940
/ to select On or Off
Pixel Frequency
(kHz) (MHz)
31.469 25.175
P/N: 4J.1JC01.001
to