(SP) for Windows (go to the Start menu and select Windows Update). Congratulations on the purchase of your new Dynex DX-HD303513 external hard drive enclosure kit. You can install a 3.5" SATA hard drive (HDD) by installing it into the enclosure.
DX-HD303513 Setting up your hard drive enclosure Setting up your hard drive 4 Gently slide the drive tray, with drive attached, into the enclosure. enclosure Read the safety precautions before you install your hard drive in the enclosure: • Use only the accessories provided.
Setting up your hard drive enclosure DX-HD303513 Note for PC users: If you do not see an additional drive in your system, Formatting the hard drive on your PC you might need to format the new drive. See the following section for Caution: Formatting is only required for a new hard drive.
DX-HD303513 Troubleshooting Troubleshooting • Connecting your hard drive to the enclosure is just like connecting a hard drive to the inside of your computer. The enclosure itself will not corrupt your data. If data has become corrupt, • Make sure the drive is functioning. A drive...
Legal notices DX-HD303513 Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Products and parts replaced under this warranty become the property owners. of Dynex and are not returned to you. If service of products and parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty lasts as long as you own your Dynex Product during the Warranty Period.