Linking And Unlinking Trays - Lexmark CX410 Quick Reference

4
Prepare the paper for loading.
•
Flex the sheets of paper back and forth to loosen them, and
then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
•
Hold transparencies by the edges, and then fan them.
Straighten the edges on a level surface.
Note: Avoid touching the printable side of transparencies.
Be careful not to scratch them.
• Flex a stack of envelopes back and forth to loosen them, and
then fan them. Straighten the edges on a level surface.
Warning—Potential Damage: Never use envelopes with
stamps, clasps, snaps, windows, coated linings, or self‑stick
adhesives. These envelopes may severely damage the
printer.
5
Locate the maximum paper fill indicator and tab.
Note: Make sure the paper or specialty media is below the
maximum paper fill indicator located on the paper guides.
1 Width guide tab
2 Maximum paper fill indicator
3 Width guide
4 Feeder extender
5 Paper size indicator
6
Load the paper, and then adjust the width guide to lightly touch
the edge of the paper stack.
•
Load paper, card stock, and transparencies with the
recommended printable side facedown and the top edge
entering the printer first.
8
•
Load envelopes with the flap side up and against the right side
of the paper guide.
Notes:
• Do not load or close the multipurpose feeder while a job is
printing.
• Load only one size and type of paper at a time.
• Paper should lie flat in the multipurpose feeder. Make sure
the paper fits loosely in the multipurpose feeder and is not
bent or wrinkled.
7
From the printer control panel, set the paper size and type in the
Paper menu to match the paper loaded in the tray.

Linking and unlinking trays

When the paper size and paper type for any trays are the same, the
printer links those trays. When one linked tray becomes empty, paper
feeds from the next linked tray. We recommend giving all unique paper,
such as letterhead and different colored plain papers, a different
custom type name so that the trays they are in do not automatically
link.
Linking and unlinking trays
1 Open a Web browser, and then type the printer IP address in the
address field.
Notes:
•
View the printer IP address on the printer home screen. The
IP address appears as four sets of numbers separated by
periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to
load the Web page correctly.
2 Click Settings > Paper Menu.