Making Copies; Canceling A Print Job - Lexmark CX410 Quick Reference

2
From the printer control panel, touch the document you want to
print.
3 Touch the arrows to get a preview of the document.
4 Use or to specify the number of copies to be printed,
and then touch Print.
Notes:
• Do not remove the flash drive from the USB port until the
document has finished printing.
•
If you leave the flash drive in the printer after leaving the
initial USB menu screen, then touch Held Jobs on the home
screen to print files from the flash drive.
Supported flash drives and file types
Notes:
•
High‑speed USB flash drives must support the full‑speed
standard. Low-speed USB devices are not supported.
• USB flash drives must support the File Allocation Table (FAT)
system. Devices formatted with New Technology File System
(NTFS) or any other file system are not supported.
Recommended flash drives
Many flash drives are tested and approved for use with
the printer. For more information, contact the place
where you purchased the printer.

Canceling a print job

Canceling a print job from the printer control
panel
1
From the home screen, touch Cancel Jobs, or press
keypad.
2 Touch the job you want to cancel, and then touch
3
Press on the keypad to return to the home screen.
Canceling a print job from the computer
For Windows users
1
Open the printers folder.
a
Click , or click Start and then click Run.
b
In the Start Search or Run dialog, type control printers.
c
Press Enter, or click OK.
2 Double‑click the printer icon.
3
Select the print job you want to cancel.
4 Click Delete.
11
For Macintosh users
File type
1
From the Apple Menu, navigate to either of the following:
Documents:
• System Preferences > Print & Scan > select a printer > Open
• .pdf
Print Queue
• .xps
•
System Preferences > Print & Fax > select a printer > Open Print
Images:
Queue
• .dcx
2
From the printer window, select the print job you want to cancel,
• .gif
and then click Delete.
• .jpeg
or .jpg
•
.bmp
Copying
• .pcx
• .tiff or .tif
• .png

Making copies

•
.fls
Making a quick copy
1
Load an original document faceup, short edge first into the ADF
tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies,
photo paper, or thin media (such as magazine clippings) into
on the the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded
properly.
.
2
If you are loading a document into the ADF tray, then adjust the
paper guides.
Note: To avoid a cropped image, make sure the size of the
original document and the size of the copy paper are the same.
3
From the printer control panel, press
Copying using the ADF
1 Load an original document faceup, short edge first into the ADF
tray.
Notes:
• Do not load postcards, photos, small items, transparencies,
photo paper, or thin media (such as magazine clippings) into
the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded
properly.
.