Lexmark X782 Clearing Jams Manual page 4

4
Turn the printer off. Open the front cover.
5
Remove all the print cartridges.
a
Pull up slightly on the cartridge handhold.
b
Pull the cartridge straight out and use the
handle to lift it off the guides.
c
Place the cartridges on a clean, flat surface
out of direct light.
6
Release the latches to open the multipurpose
feeder (area A) all the way.
7
Remove the image transfer unit.
a
Raise the lever to unlock the image transfer
unit.
b
Pull down on the handle.
c
Slide the image transfer unit out and place it
on a clean, flat surface.
Warning: Do not touch the transfer belt.
Touching the belt will damage the
image transfer unit.
8
Look inside the printer. Remove all torn paper
or other jams.
9
Insert the image transfer unit back into the
printer.
a
Align the guides with the insertion grooves
and gently slide the unit in.
b
Rotate the handle up, and push gently to
lock the unit in place.