Table of Contents
Advertisement
1.14.2.10 +5 V Standby Power Indicator LED and Additional LEDs
The +5 V standby power indicator LED shows that power is still present even when the
computer appears to be off. Figure 7 shows the location of the standby power
indicator LED on the board.
CAUTION
If AC power has been switched off and the standby power indicators are still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
In addition to the standby power indicator, the board contains three LEDs that indicate
the following:
•
The processor LED indicates an elevated temperature on the processor that could
effect performance
•
The Voltage Regulator LED indicates an elevated temperature in the processor
voltage regulator circuit that could effect performance
•
The hard drive LED indicates SATA drive activity
Product Description
35
Advertisement
Table of Contents
