Scanning With Wia Driver - Canon 2918B002 On-Screen Manual

Scanning with WIA Driver

>
Advanced Guide Scanning
Scanning with WIA Driver
You can scan an image from a WIA-compliant application and use the image in that application.
The procedure varies depending on the application. The following procedures are examples only.
For details, refer to the application's manual.
Important
In Windows 2000, you cannot scan using the WIA driver.
In Windows XP, you cannot scan using the WIA driver 2.0.
Scanning with WIA Driver 1.0
The following is an example of scanning using Paint.
1.
Place the document on the Platen.
Placing Documents
2.
In File, click From Scanner or Camera.... (Select the command to scan a document
in the application.)
3.
Select an image type according to the document to be scanned.
Note
To scan with the values previously set in Adjust the quality of the scanned picture, select
Custom Settings.
4.
Click Adjust the quality of the scanned picture and set the preferences as required.
Brightness
Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the
>
Other Scanning Methods > Scanning with WIA Driver
Stránka 510 z 695 stránek