Duplex Printing - Canon 2918B002 On-Screen Manual

Duplex Printing

> Printing from a Computer
Advanced Guide
Duplex Printing
Duplex Printing
The procedure for printing data on both sides of a sheet of paper is as follows:
1.
Open the printer driver setup window
2.
Set duplex printing
Check the Duplex Printing check box on the Page Setup tab.
3.
Select the layout
Select Normal-size Printing (or Fit-to-Page Printing, Scaled Printing, or Page Layout Printing) from
the Page Layout list.
4.
Specify the side to be stapled
The printer analyzes the Orientation and Page Layout settings, and automatically selects the best
Staple Side. If you want to change the setting, select another value from the list.
5.
Set the margin width
If necessary, click Specify Margin... and set the width of the stapling margin, and then click OK.
6.
Complete the setup
Click OK on the Page Setup tab.
When you execute print, the document will be printed on one side of a sheet of paper. When the
printing of one side is complete, set the paper correctly by following the message and click OK. The
document will be printed on the opposite side.
Important
>
Printing with Other Application Software
Stránka 237 z 695 stránek
> >
Various Printing Methods