Table of Contents
Advertisement
68
Connectivity
Protect your device
Set your device to lock automatically
Want to protect your device against
unauthorized use? Define a lock code, and
set your device to lock itself automatically
when you're not using it.
1
Select
Menu
Settings
and
management
Phone and SIM
2
Select
Lock
code, and enter a lock
code. A minimum of 4 characters is
required, and numbers, symbols, and
upper and lower case letters can be
used.
Keep the lock code secret and in a safe
place separate from your device. If
you forget the lock code and your
device is locked, your device will
require service. Additional charges
may apply, and all the personal data
in your device may be deleted. For
more information, contact a Nokia
Care point or your device dealer.
3
Select
Phone autolock
define the length of time after which
the device is locked automatically.
Lock your device manually
In the home screen, press
phone, and enter the lock code.
Unlock your device
Slide the lock switch, enter the lock code,
and select OK.
If the lock switch is out of reach, press the
menu key, and select Unlock.
Lock your device remotely
Forgot your device at work and want to
lock it to prevent unauthorized use? You
can lock your device remotely using a
predefined text message. You can also
lock the memory card remotely.
Help & Settings
>
Phone
Phone
>
Security settings
>
card.
period, and
, select
Enable remote locking
1
Select
Settings
management
Phone and SIM card
phone locking
2
Enter the text message content. It can
>
be 5-20 characters, and both upper
and lower case letters can be used.
>
3
Enter the same text again to verify it.
4
Enter the lock code.
Send the lock message
To lock the device remotely, write the
predefined text, and send it to your device
as a text message.
To unlock your device, you need the lock
code.
Connectivity
Internet connections
Define how your device connects to the
internet
Your device automatically checks for and
connects to an available known network
when a network connection is needed.
Selection is based on the connection
settings, unless there are application-
Lock
specific settings applied.
Select
Menu
Settings
Automatically switch to a known Wi-Fi
network connection when available
Select
Switch to Wi-Fi
only.
You can also connect to Wi-Fi networks
manually using the Wi-Fi wizard
application.
Menu
Help & Settings
>
and
Phone
>
Security settings
>
>
> Enabled.
Help & Settings
>
and
Connectivity
Known Wi-Fis
>
>
Phone
>
Remote
>
> Settings.
Advertisement
Table of Contents
