Table of Contents
Advertisement
68
Connectivity
Enable remote locking
1
Select
Menu
Settings
and
management
Phone and SIM card
phone locking
2
Enter the text message content. It can
be 5-20 characters, and both upper
and lower case letters can be used.
3
Enter the same text again to verify it.
4
Enter the lock code.
Send the lock message
To lock the device remotely, write the
predefined text, and send it to your device
as a text message.
To unlock your device, you need the lock
code.
Connectivity
Internet connections
Define how your device connects to the
internet
Your device automatically checks for and
connects to an available known network
when a network connection is needed.
Selection is based on the connection
settings, unless there are application-
specific settings applied.
Select
Menu
Help & Settings
>
Settings
and
Connectivity
Automatically switch to a known Wi-Fi
network connection when available
Select
Switch to Wi-Fi
only.
You can also connect to Wi-Fi networks
manually using the Wi-Fi wizard
application.
Help & Settings
>
Phone
Phone
>
Security settings
>
Remote
>
> Enabled.
>
> Settings.
Known Wi-Fis
>
Only use a Wi-Fi connection
For Wi-Fi connections when in your home
>
network, select
country
>
connections when outside your home
network, select
abroad
>
Automatically use a packet data
connection when in your home
network
Select
Data use in home country
Automatic.
To set the device to request confirmation
before connecting, select
home country
Request confirmation before using a
packet data connection when outside
your home network
Select
Data use when abroad
ask.
To set the device to automatically
connect, select
abroad
> Automatic. Opening
connections when abroad can raise data
transfer costs substantially.
Change access point priority for the
internet connection
1
Select
2
Select and hold an access point, and
from the pop-up menu, select
priority.
3
Tap the position in the list to move the
access point to.
Example: If a Wi-Fi access point is ranked
above a packet data access point in the
list, the device will always try to first
connect to the Wi-Fi access point, only
connecting to the packet data access point
if the Wi-Fi network is not available.
Data use in home
Wi-Fi network
>
Data use when
Wi-Fi network
Data use in
Always
>
Data use when
Destinations
> Internet.
only. For Wi-Fi
only.
>
ask.
Always
>
Change
Advertisement
Table of Contents
