Intel ® High Definition Audio Subsystem; Front/Back Panel Audio Connector Options For High Definition Audio Subsystem - Intel BLKD915PGNL - LGA775 800FSB 4DDR Audio Lan SATA ATX 4PCI Technical Product Specification

For information about
The location of the front panel audio connector, the optional ATAPI CD-ROM
connector, and the optional S/PDIF connector on the D915PGN board
The location of the front panel audio connector, the optional ATAPI CD-ROM
connector, and the optional S/PDIF connector on the D915PSY board
The signal names of the front panel audio connector
The signal names of the optional ATAPI CD-ROM connector
The signal names of the optional S/PDIF connector
®
1.10.3 Intel High Definition Audio Subsystem
The Intel High Definition Audio subsystem includes the following:
•
Intel 82801FB I/O Controller Hub (ICH6)
•
Realtek ALC860 audio codec
•
Microphone input that supports a single dynamic, condenser, or electret microphone
The front and back audio connectors are configurable through the audio device drivers. The
available configurable audio ports are shown in Figure 10.
Line Out/
Retasking Jack F
[Port 2]
Figure 10. Front/Back Panel Audio Connector Options for High Definition Audio Subsystem
Front Panel
Audio Connectors
Retasking Jack E
Audio Connectors
Mic In/
[Port 1]
Product Description
Refer to
Figure 18, page 66
Figure 19, page 68
Table 23, page 70
Table 22, page 70
Table 21, page 70
Back Panel
Line In/
Retasking Jack C
Line Out/
Retasking Jack D
Mic In/
Retasking Jack B
OM16989
31