3. Push the card gently to lock it
into place. Close tight the cover
(3).
Remove a memory card
Open the cover. Push the card
gently to release it.
card and press 'OK'
the card out, and select OK. Close
the cover.
Charge the battery
1. Connect the charger to the wall socket.
2. Open the side door (1). Connect the charger plug to the charger connector in
the device (2).
If the battery is completely
discharged, it may take a few minutes
before the charging indicator appears
on the display or before any calls can
be made.
The charging time depends on the
charger and the battery used.
Switch the device on
and off
Press and hold the power key.
If the device asks for a PIN code, enter the PIN code, and select OK.
G e t s t a r t e d
Remove memory
is displayed. Pull
11