Charge The Battery; Turn On Your Htc Tilt™ 2 - HTC Tilt 2 Quick Start Manual

Charge the battery

New batteries are shipped partially charged.
Before you start using your device, it is
recommended that you charge the battery.
To charge the battery
• Connect the USB connector of the AC
adapter to the PC and to the sync connector
on your device, or
• Plug in the AC adapter to an electrical outlet
to start charging the battery.
Note: Only the AC adapter and USB sync
cable provided with your device must be
used to charge the device.
As the battery is being charged while the
power is on, a charging icon
title bar of the Home screen. After the battery
has been fully charged, a full battery icon
appears in the title bar of the Home screen.
Warning! Do not remove the battery from
the device while you are charging it
using the AC or car adapter.
Turn on your HTC Tilt™ 2
Press the POWER button to turn on the device.
appears in the
It may take several minutes for the TouchFLO
3D interface to load during initial setup. Do not
press any buttons or turn off
the device until the device
completes the startup.
Power button
7