Table of Contents
Advertisement
170 Getting Connected
6.
Select an Authentication Type. By default, the Authentication Type for your
phone is Open System authentication.
Note
For LEAP to work correctly, the receiving phone (your phone) must be set with the
same SSID, user name, and password as the access point.
To forward saved network settings
You can send network profile settings to another phone to enable it to connect to
that network.
1.
On the Wi-Fi Manager screen, select Saved Networks.
2.
Select a saved network and then select Menu > Forward Settings.
3.
Enter the phone number directly or select Menu > Contacts to add a number
from Contacts. You can add up to six numbers.
4.
Select Send. After a moment, a message appears saying that the settings
were sent.
5.
The receiving phone gets a message that Wi-Fi
security settings have been sent.
• Select View to view and then save the
• Select Cancel to save the message with the
Note You can view networks that have been sent to
network to Saved Networks.
settings to Received Networks.
your phone. On the Wi-Fi Manager screen, select
Received Networks.
Advertisement
Table of Contents
