Whirlpool ADP 5300 SL Quick Reference Manual page 7

Silver dishwasher with 12 place settings adp 5300 sl
Hide thumbs Also See for ADP 5300 SL:
Table of Contents

Advertisement

Crockery and cutlery...
...salt indicator lit
...have deposits: regeneration salt residue
...are not dry
...have discoloured plastic parts
...opaque glasses, etc.
...removable deposits on glasses
...glasses not sparkling
...permanent deposits on glasses
...tea cups darken and dirt does not disappear
after washing in dishwasher
...rust marks
...other marks
...streaks
...suds
Possible causes...
- Use tablets for soft water.
- Water too hard.
- Salt reservoir cap open.
- Not enough rinse aid.
- Plastic containers dry badly.
- Clean dishes left in dishwasher for a long time after end
of cycle (e.g. when using "Delayed start" option).
- Incorrect arrangement of the concave items in the rack. - Arrange crockery so that water does not collect in cavities.
- Incorrect dosage the rinse aid.
- Rapid program selected.
- Tomato/Carrot juice.
- Dishes unsuitable for washing in dishwashers (porcelain),
- Usage of incorrect programs for glasses.
- Not conform of glasses to washing in dishwashers
(porcelain).
- Rainbow effect.
- Not known.
- Pre-wash program not used.
- Rinse aid dosage too low.
- Rinse aid dosage too high.
- Unsuitable dosage of detergent/rinse aid.
- Set "Tablet" option; if this option is not available, it is normal for the salt indicator to light up.
- In areas with very hard water, more regeneration salt needs to be added (see page 2, "How to set water
hardness").
- Close the salt reservoir cap properly.
- If you use a combined action detergent, try adding more rinse aid.
- Synthetic materials do not dry well; if wet at end of cycle, wipe dry.
- In this situation, the presence of drops of water on dishes and on the sides of the dishwasher is normal.
Try releasing the door 5 minutes before removing the dishes.
- Increase the dosage of rinse aid (see page 3, "Adding rinse aid").
- The Rapid program 40°C / 45°C is intended for quickly washing lightly soiled dishes. If used for a full load of
medium/heavy soiled dishes, the dishes may not dry completely. If so, select a standard-length program. For best
results, open the door after the end of the program and wait 15 minutes before unloading the dishwasher.
- Tomato sauce, for example, can lead to discolouring of plastic parts. Powder detergent is recommended as
it allows slightly higher doses to be used for improved whitening. Programs with higher wash temperatures
should be used.
- Only use dishwasher-proof crockery and dishes.
- Dishes should be put together, to avoid touching each other. Do not put glassware together in baskets.
Use suitable program for glass.
- Some kinds of glass cannot be washed in the dishwasher.
- This phenomenon is irreversible. We recommend in future:
- Change the control of system of dosage of softener.
- Be careful – follow recommended detergent dosage.
- For combined action tablets see detergent producer's recommendations.
- This phenomenon is inevitable. Theine alters colours permanently.
- Salty or acidic food residues can cause rust marks even on stainless steel cutlery. To avoid this, always use
the pre-wash program if the dishes are to be washed later.
- In the presence of marks, increase the rinse aid dosage (see page 3, "Adding rinse aid").
- If you use a combined action detergent, possibly add more rinse aid.
- In the presence of streaks, reduce the rinse aid dosage (see page 3, "Adding rinse aid").
- If you use a combined action detergent which includes rinse aid, do not add any additional rinse aid.
- Only use the amount of detergent/rinse aid required, since excessive amounts can lead to excess suds.
What to do if...
Solutions...
GB -7-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Adp 5300 wh5300

Table of Contents