Table of Contents
Advertisement
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
Avoid touching the connector on the memory module or on the
computer. Grease or dust on the connector may cause memory
access problems.
11
Carefully remove the new memory module from its antistatic
packaging, without touching its connector.
12
Locate an empty memory module slot on the underside of the
computer.
NOTE
If no memory slot is available, you must remove a module by
performing steps
13
Pick up the memory module by its sides, avoiding any contact
with its connector. Position the module toward the socket,
aligning the connector's notch with the matching key in the
socket.
notch
latch
key
(Sample Illustration) Aligning the memory module with the socket
Adding memory (optional)
2-3
of
"Removing a memory module" on page
connector
latch
Getting Started
47
50.
Hide quick links:
Advertisement
Table of Contents
