Advertisement
Air filter
Cover
Fuel strainer
MAINTENANCE AND CARE
- ALWAYS KEEP THE UNIT CLEAN -
Muffler cover
Lid
Screen
- 16 -
AIR FILTER
Clean before using the unit.
-
Remove the cover. (for air filter and carburetor)
-
Take off the air filter.
-
Brush off dust lightly or wash it in suitable
cleaning fluid.
-
When you wash it in a solvent, dry it
completely before putting back in place.
FUEL STRAINER
Check periodically.
-
Do not allow dust to enter into fuel tank.
-
Clogged strainer will cause difficulty in starting
engine or abnormalities in engine
performances.
-
Pick up fuel strainer through fuel inlet port
with a piece of steel wire or the like.
-
When strainer is dirty, wash it in suitable
cleaning fluid or replace it.
MUFFLER AND EXHAUST PORT (SAM)
Clean as necessary.
Carbon deposits in cylinder exhaust port and
muffler will reduce engine output.
-
Muffler can be removed by taking off muffler
cover.
-
Be careful not to scratch cylinder or piston
when cleaning cylinder exhaust port.
Use non-ferrous plastic or wood.
Check loose nuts and screws on the muffler part
before every use.
Retighten them firmly if necessary.
CYLINDER FINS
Check periodically.
Clogged fins will result in poor engine cooling.
Remove dirt and dust from between fins to let
cooling air pass easily.
Hide quick links:
Advertisement
