Use The Headset; Connect The Headset To A Mobile Phone; Automatic Power Saving; Use Your Headset - Philips SHB9100RD/00 User Manual

4 Use the headset

Connect the headset to a
mobile phone
1
Turn on your mobile phone.
2
Press and hold
» The blue LED is on.
» The headset is reconnected to the last
connected device automatically. If the
last one is not available, the headset
tries to reconnect to the penultimate
connected device.
Note
•
If you turn the mobile phone on or its Bluetooth feature
after turning the headset on, connect the headset from
the Bluetooth menu on your mobile phone.

Automatic power saving

If the headset cannot find any Bluetooth device
to connect to in range within five minutes, it
powers down automatically to save the battery
life.

Use your headset

Task Operation
Turn the headset Press and
on. hold
more than 4
seconds
EN
10
to turn the headset on.
Sound or LED
Indicator
1 short beep
for - 3 white
flashes: Battery
low < 25%
- 2 white
flashes: Battery
level < 50%
- 1 blue flash:
Battery level >
50%
Turn the headset Press and
off. hold
more than 4
seconds
Play or pause
Tap
music.
Pick up or
Tap
terminate a call.
Reject a call.
Hold
Redial the last Double tap 1 short beep
number.
Switch caller in Double tap 1 long beep
a call.
Transfer a call Hold
to your mobile
phone. (This more than 4
function is seconds
available if your
mobile phone
supports this
feature.)
Adjust volume. Slide up and
down VOL
+/-
Skip forward. Tap
Skip backward. Double tap 1 short beep
Mute/unmute Tap
the microphone
in a call.
Activate voice Double tap 2 short beeps
dialing
Other status and indicators
Headset Status
The headset is connected
to a Bluetooth device, while
the headset is in standby
mode or while you are
listening to music.
The headset is ready for
pairing.
- 1 long beep
for - 1 long white
flash
1 short beep
1 short beep
1 short beep
1 long beep
for
1 short beep
1 short beep
1 short beep /
2 short beeps
before dial
tone
Indicator
Blue LED flashes
every 8 seconds.
LED flashes
whiteand
bluealternately.