International Symbols - Echo SRM-2100SB, SRM-2400SB Operator's Manual

4 4
Shaft Decal
WARNING
• This unit can be dangerous and cause serious injury if improperly
used. To reduce injury risk to operator, helpers and bystanders,
read and understand the Operator's and Safety manuals.
• Blindness can occur from objects that are thrown or ricocheted even
with shield in place. Operators, helpers and bystanders must wear
ANSI Z87.1 approved eye protection.
• Always wear hearing protection when operating unit.
• Prevent accidental contact with unit and any cutting attachment.
Maintain a 15M (50 ft.) radius, DANGER ZONE surrounding the
operator. ONLY the operator, dressed in proper protective clothing
should be in the DANGER ZONE.
• Beware of KICKOUT (blade thrust) when using blades. Special
precautions are necessary for blade operation, see your Operator's
and Safety Manuals. ONLY install ECHO approved blades on
Brush Cutters (SRM) models equipped with proper blade shield,
U-handles, harness, blade collar, nut and cotter pin.
• Blade/Cutting attachment does not stop immediately after releasing
throttle. Keep hands and feet clear of blade/cutting attachment
unless engine is shut off and cutting attachment is not moving.
• INSPECT BLADES BEFORE USE.
• DO NOT USE DAMAGED, CRACKED, BENT, DULL OR
IMPROPERLY SHARPENED BLADES.
• Do not remove shields, modify the unit or install attachments or
parts not approved by ECHO. Approved attachment information
and replacement Operator's and Safety Manuals are available from
your ECHO dealer or by writing: ECHO, INCORPORATED, 400
OAKWOOD RD., LAKE ZURICH, IL 60047.

INTERNATIONAL SYMBOLS

Symbol
Symbol form/shape
description/application
"WARNING, SEE
OPERATOR'S
MANUAL
Wear eyes, ears and
head protection
Finger Severing
Wear hand and
foot protection
DANGER
Symbol
Symbol form/shape
description/application
Hot
Surface
Fuel and oil mixture
Emergency stop
WARNING
Keep bystanders and helpers
away 15 m (50 ft.).
P/N 89016844830
Symbol
Symbol form/shape
description/application
Carburetor adjustment
- High speed mixture
Carburetor adjustment
- Idle speed
Carburetor adjustment
- Low speed mixture
Blade and string
line capable
Do not exceed
10,000 RPM.
Symbol
Symbol form/shape
description/application
Primer Bulb
Ignition
ON/OFF
Engine choke
control.
Do not operate
without guards and
shields in place.
BEWARE
- Thrown,
Ricochet
objects