LG Mach LS860 User Manual page 67

●
End to end the current call.
●
Dialpad to display the dialpad to enter additional numbers, for example, an extension or
access code.

For example: When you call your bank's 800 number, use your dialpad to enter your
account number and PIN.
●
Speaker to route the phone's audio through the speaker (On) or through the earpiece
(Off).
 Activate Speaker to route the phone‟s audio through the speaker. (You can adjust
the speaker volume using the volume buttons.)
 Deactivate Speaker to use the phone‟s earpiece.
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
●
Mute to mute the microphone during an active call. Tap again to unmute the microphone.
Note: If Mute is activated, the speaker mode is deactivated.
●
Bluetooth (Only available when a Bluetooth headset is connected to your phone) to
route the phone's audio through a connected Bluetooth headset (On) or through the
speaker (Off). For details about pairing the phone with a Bluetooth headset, see
Bluetooth Phones.

When the call is routed to a Bluetooth headset, the current call area shows the
Bluetooth call icon (
Note: The Headset button is activated to show the current call is routed to the connected
Bluetooth headset.

To route the current call back to the phone, tap Bluetooth to temporarily use the
phone. Tap it again to route the call back to the connected Bluetooth headset.

When Bluetooth or the Bluetooth headset is turned off, the call is routed through
either the earpiece or speaker and shows (
Tap during a call to display a list of additional in-call features. Tap an option to select it.
●
Contacts: Display your contacts list.
●
Memo: Create a new memo while remaining on the call.
●
Messaging: Opens the Messaging screen.
Phone Calls
).
57
).
Pairing