Developer Options - LG Mach LS860 User Manual

Player(WMP) over version 10.x is installed on the PC, MTP driver may be installed. For
Windows® 7 except for N edition, the driver is installed.
USB tethering
You can use your phone to provide a data connection to a computer by activating data tethering
and connecting them with a USB cable.
To tether your phone with your computer using the USB
1. Connect your phone to your computer with a USB cable.
2. Tap >
3. Tap OK if you agree with the prompt.
Note: - Data Tethering requires an appropriate data plan. Phones connected by tethering use
data from your plan. Plans are not unlimited and significant charges may be incurred if
the included data allowance is exceeded. Performance may vary depending on the
number of phones connected and other factors.
- You cannot access your phone's microSD card on your computer when using USB
tethering.
Ask on connection
Checkmark to have the phone ask you to choose which USB connection mode it should connect
with to a PC.

Developer Options

Keep in mind that turning on these developer settings may result in irregular device behavior.
To turn on debug mode when USB is connected:
1. Tap >
2. Tap USB debugging.
To set the phone to flash the screen when applications operate for a long period of time on the
main thread:
1. Tap >
2. Tap Enable strict mode (a blue checkmark displays).
To make the touch data visible on the screen:
1. Tap >
Settings
> Systems settings > Connectivity > USB tethering.
> Systems settings > Developer options.
> Systems settings > Developer options.
> Systems settings > Developer options.
91