Table of Contents
Advertisement
16
4.
Bundle and secure ignition leads against engine housing with clip
(I).
BALANCE AND ADJUST UNIT
1.
Loosen harness clamp screw.
2.
Put on harness and attach unit to harness.
3.
Slide harness clamp up (J) or down until unit balances with head
approximately 50-75 mm (2 -3 in.) from the ground.
4.
Tighten harness clamp screw.
5.
Loosen upper U-Handle clamp screws (K), and position U-Handle
for comfortable operation.
6.
Tighten U-Handle clamp screws and 8 mm clamp bolt securely.
BLADE SELECTION
The type of Blade used MUST be matched to the type and size of material cut. An improper or dull blade can cause
serious personal injury. Blades MUST be sharp. Dull blades increase the chance of kick-out and injury to yourself
and bystanders.
WARNING
J
DANGER
I
K
Advertisement
Table of Contents
