Air Filter; Fuel Filter - Echo SRM - 2100SB Operator's Manual

Grass trimmer/brush cutter
Hide thumbs Also See for SRM - 2100SB:
Table of Contents

Advertisement

AIR FILTER

Level 1.
Tools required: Cleaning brush, 1" or 2" medium bristle paint brush.
Parts required:
SRM-2100SB 90008 REPOWER
SRM-2400SB 90030 REPOWER
1. Close choke (Cold Start Position). This prevents dirt from entering
the carburetor throat when the air filter is removed. Brush accumu-
lated dirt from the air cleaner area.
2. Remove the air cleaner cover. Clean and inspect the element for
damage. If element is fuel soaked and very dirty, replace.
3. If element can be cleaned and reused, be certain it:
•still fits the cavity in the air cleaner cover.
•is installed with the original side out.
NOTE
Carburetor adjustment may be needed after air filter cleaning/
replacement.

FUEL FILTER

Level 1.
Tools required: 203-254 mm ( 8 - 10 in.) length of wire with one end bent
into a hook, Clean rag, funnel, and an approved fuel container.
Parts required:
SRM-2100SB 90008 REPOWER
SRM-2400SB 90030 REPOWER
WARNING
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling, otherwise serious personal injury may result.
1. Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.
2. Use the "fuel line hook" to pull the fuel line and filter from the tank.
3. Remove the filter from the line and install the new filter.
TM
AIR & FUEL FILTER KIT.
TM
AIR & FUEL FILTER KIT.
TM
AIR & FUEL FILTER KIT.
TM
AIR & FUEL FILTER KIT.
DANGER
G
T
RASS
RIMMER
O
PERATOR
SRM-2100SB
SHOWN
/B
C
RUSH
UTTER
'
M
S
ANUAL
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srm-2100sb type 1eSrm - 2400sb

Table of Contents