Canon PowerShot A520 Manual page 13

Chapter 2
Downloading and
Printing Images
■
Procedures for Subsequent Connections to a Computer
IMPORTANT
• With some versions of Windows, you may not be able to use
this method of starting ZoomBrowser EX the very first time the
camera is connected to the computer after it is booted up. (The
dialog shown to the right will not display even if you connect
the camera to the computer correctly.)
In this case, use the icon method to start ZoomBrowser EX.
REFERENCE
• If the Scanners and Cameras Wizard displays, close it and use
the icon method to start ZoomBrowser EX.
• A device selection dialog will display if you have both a camera
and a memory card reader connected at the same time. Confirm
that your camera model name or [Canon Camera] appears in
the list box and click [OK].
13
ZoomBrowser EX Software User Guide
Downloading Images to a Computer (3/8)
1.
Use the interface cable to connect the camera to the
computer.
Please see your Camera User Guide for information on how to
connect the camera to a computer. With some camera models,
you must set the camera to the Playback mode to establish a
connection to a computer.
If the Auto Start settings have been set according to the
previous page, the Camera Control Window will open just by
connecting the camera to the computer with the interface
cable.
Camera Control Window
REFERENCE
• If you do not need to download images (if you wish to proceed
directly to ZoomBrowser EX's Main Window), click [Exit] and use
the icon method to start ZoomBrowser EX.
• The explanation of which downloading method should be used
after ZoomBrowser EX has started automatically is contained in
the "Downloading Images Automatically" section in Chapter 3.