Table of Contents
Advertisement
2.
Locate the front system fan near the
5.25-inch drive bays.
3.
Squeeze the front system fan
latches (step a) and pull out the
front system fan (step b), as shown
in the right figure.
4.
Follow the previous instructions in
reverse to reinstall the front system
fan.
Removing the rear system fan
To remove the rear system fan:
1.
Unplug the system fan cable from
the REAR_FAN1 connector on the
motherboard.
2.
Shift the two hooked tabs leftward and
rightward respectively, then carefully
remove the system fan.
3.
Follow the previous instructions in
reverse to reinstall the rear system fan.
2-28
a
b
a
Chapter 2: Hardware setup
Advertisement
Chapters
Table of Contents
