International Symbols; Equipment - Echo HC-1500 Type 1E Operator's Manual

Echo hedge clipper operators manual
Hide thumbs Also See for HC-1500 Type 1E:
Table of Contents

Advertisement

4

INTERNATIONAL SYMBOLS

Symbol
Symbol form/shape
description/application
Read and understand
owners manual.
Wear eyes, ears and
head protection
Emergency stop
Wear hand protec-
tion. Use two handed.
Engine choke
control.
Chain lubrication

EQUIPMENT

Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
• Never adjust blades when the engine is operating.
• Inspect hand guard for damage. Replace if damaged or missing.
• Check that the blade assembly is firmly attached and in safe operating
condition. Dull, loose or damaged blades should not be used.
• ECHO, INC. will not be responsible for the failure of cutting devices
or accessories which have not been tested and approved by ECHO
for use with this unit.
Symbol
Symbol form/shape
description/application
Fuel and oil mixture
Finger Severing
Hot
Surface
DO NOT smoke
near fuel.
Ignition
Ignition
ON/OFF
Do not operate
without guards
in place.
Symbol
Symbol form/shape
description/application
Carburetor adjustment
- Low speed mixture
Safety/Alert
Avoid all power
lines. This unit is not
insulated against
electrical current.
Plan retreat path
from falling
objects.
DO NOT allow
flames or sparks
near fuel.
Symbol
Symbol form/shape
description/application
Carburetor adjustment
- High speed mixture
Carburetor adjustment
- Idle speed
Do not operate clos-
er than 15 M (50 ft.)
from electrical haz-
ards.
Primer bulb
Wear slip resistant
foot wear.
Keep bystanders at least
4.5 meters (15 feet) away.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents