Table of Contents
Advertisement
MIDI Device ID
When working with MIDI Machine Control, you can set
a MIDI device ID so that other devices do not intercept
commands for the X-48MKII (and vice-versa).
To set the MIDI device ID:
Mouse/Keyboard Operation
1 Click the Windows menu, select Settings and click the
System tab.
2 Click the MIDI Device ID pulldown.
3 Select a device ID from the list.
Front Panel Operation
1 Press the SYS button.
2 Press the
/
buttons to select
5
b
and press CHNG.
ID
3 Select an ID and press ENTER.
4 Press the CLEAR/HOME button to return to the
Home Screen.
Sony 9-Pin
This section explains how to control the X-48MKII using
Sony 9-pin, also called P2 or RS-422.
Track Arm
Setting it to Digital/Console allows you to arm tracks over
9-pin. Set this to Local if you don't want to arm tracks this
way.
Punch Delay
You can set the punch-in delay from off to 6 frames. This
is used when it is necessary for the X-48MKII to emulate
an older video deck to match what is expected by the
controller.
Chase Control
Choose LTC (SMPTE) or MTC (MIDI) or disable it here.
To access these settings
Mouse/Keyboard Operation
1 Click the Windows menu and select Settings.
2 Click the Prefs tab.
3 There are three settings under the Sony 9-pin
heading: Track Arm, Punch Delay and Chase Control.
1 Press the PREF button.
2 Press the
Video Reference
When working in video, use video black burst to align
your audio playback and time code to exactly a frame
edge.
To switch on video reference:
1 Click the Windows menu and choose Settings.
2 Select the Sync tab.
Mi di Devi ce
3 Check the box labeled Resolve to Video In.
1 Press the SYNC button.
2 Press the
3 Use the
The Video Clock input supports Tri-Level Sync for High
Definition Video. If the black burst input is Tri-Level, the
X-48MKII automatically enables this feature. See Chapter 5,
Recorder, for more on sample clock and video sync.
Pull Up/Pull Down Sample Rates
The X-48MKII supports pull-up and pull-down sample
rates for use in film and video post-production. When
you select the sample rate for the new session, be sure to
consider the final delivery format and set your sample rate
accordingly. See Chapter 5, Recorder for more on sample
rates.
4 – Configuration
Front Panel Operation
/
buttons to select
5
b
or
P2 Punch De l ay
P2 Chase Contro l
and press CHNG.
Mouse/Keyboard Operation
Front Panel Operation
/
buttons to select
5
b
and press CHNG.
Vi deo In
/
buttons to select
5
b
ENTER.
,
P2 T rack Arm
Reso l ve to
and press
On
21
TASCAM X-48MKII
Advertisement
Table of Contents
