Spark Plug; Cooling System Cleaning - Echo PPT-2100 Operator's Manual

24

SPARK PLUG

Level 2.
Parts Required: Spark Plug, NGK BPM-7A (15901010630 - PPT-2100)
1. Remove spark plug and check for fouling, worn and rounded center
electrode.
2. Clean the plug or replace with a new one. DO NOT sand blast to
clean. Remaining sand will damage engine.
3. Adjust spark plug gap by bending outer electrode.
4. Tighten spark plug to 145-155 kg/cm (125-135 in. lb.).

COOLING SYSTEM CLEANING

Level 3.
Parts Required: None.
IMPORTANT
To maintain proper engine operating temperatures, cooling air
must pass freely through the cylinder fin area. This flow of air
carries combustion heat away from the engine.
Overheating and engine seizure can occur when:
• Air intakes are blocked, preventing cooling air from reaching the
cylinder.
• Dust and grass build up on the outside of the cylinder. This build
up insulates the engine and prevents the heat from leaving.
Removal of cooling passage blockages or cleaning of cooling fins is
considered "Normal Maintenance". Any failure attributed to lack of
maintenance is not warranted.
NGK BPM-7Y (15901019630 - PPT-2400)
0.65 mm
(0.026 in.)
A