Table of Contents
Advertisement
MAINTENANCE AND CARE
- ALWAYS KEEP THE MACHINE CLEAN -
Filter
Air cleaner cover
0.6 - 0.7 mm (0.024 - 0.028 in.)
Carburetor
Case
- 8 -
AIR FILTER
•
Check before every use.
•
Remove filter cover.
- Remove wing nut.
•
Brush off dust lightly or wash in a non-
inflammable solvent if necessary. Dry well
before reinstalling.
CHECK FUEL SYSTEM
•
Check before every use.
•
After refueling make sure fuel does not leak or
exude from around fuel pipe, fuel grommet or
fuel tank cap.
•
In case of fuel leakage or exudation there is a
danger of fire. Stop using the machine
immediately and request your dealer to inspect
or replace.
SPARK PLUG
•
Clean or replace the plug if fouled with heavy or
oily deposits. Replace the plug if the center
electrode is worn or rounded at the end.
- The standard spark gap is 0.6 to 0.7 mm
(0.024 to 0.028 in.).
- Correct the spark gap if it is wider or narrower
than the standard gap.
•
Fastening torque = 15 to 17 N
•
m
(130 to 145 in
lb.)
•
Advertisement
Table of Contents
