BenQ MW860USTi User Manual page 43

2. Press MODE/ENTER and the 3D Color Management page displays.
3. Highlight Primary Color and press
Yellow, Green, Cyan, Blue, or Magenta.
4. Press to highlight Hue and press
will include colors consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right
for how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its range
will include red close to yellow and red close
to magenta.
5. Press to highlight Saturation and adjust
its values to your preference by pressing
. Every adjusent made will reflect to the
image immediately.
For example, if you select Red and set its
value at 0, only the saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of "0" removes that color from the image entirely. If the
saturation is too high, that color will be overpowering and unrealistic.
6. Press to highlight Gain and adjust its values to your preference by pressing
. The contrast level of the primary color you select will be affected. Every adjusent
made will reflect to the image immediately.
7. Repeat steps 3 to 6 for other color adjusents.
8. Make sure you have made all of the desired adjusents.
9. Press MENU/EXIT to exit and save the settings.
/ to select a color from among Red,
/ to select its range. Increase in the range
RED
Magenta
/
Yellow
GREEN
Cyan
BLUE
/
Operation
43