Using The Turn Off Computer Or Shut Down Commands - Toshiba M105-S1021 - Satellite - Celeron M 1.46 GHz User Manual

The Standby command does not store unsaved
information on your hard disk. You should save your
work before putting your computer on Standby.
Restarting from Standby takes less time and consumes
less main battery power than restarting from turning off
the computer or using Hibernation mode.
When starting up again, the computer returns to the mode
in which you left it, including all open programs and files
you were using.
For information on using Standby, see
configuring Standby mode" on page

Using the Turn Off Computer or Shut Down commands

Depending on the operating system installed, use the
following steps to turn off your computer.
Turn Off
For Windows
Professional or Windows
domain server, follow these steps to turn off the computer:
1 Click Start, and then click Turn off computer.
The Turn off computer dialog box appears.
If you power down using the Standby command and the main
battery discharges fully, your unsaved information will be lost.
Be sure to save your work first.
®
XP Home, or either Windows
Getting Started
Turning off the computer
"Using and
76.
®
XP MCE when not connected to a
71
®
XP