Understanding The Basics - HP 4150 - OmniBook - PIII 500 MHz User Manual

Understanding the Basics

Docking the OmniBook to the dock is just like simultaneously adding several
devices to the OmniBook. Docking causes Windows 95 to create a new hardware
profile. The default hardware profile shipped with the OmniBook is an undocked
profile.
If you are using Windows NT on your system and your system does not have a
docked hardware profile, you need to create a docked profile for your OnmiBook.
See 'To create a docked hardware profile" on page 1- 23 for instructions.
This section shows you how to get your dock and OmniBook up and running
quickly, including how to
Set up the port replicator or mini dock.
Dock the OmniBook.
Undock the OmniBook.
Reset the OmniBook while docked.
Attach a security cable.
Using the Dock
1-11