Cdp-6; Cert Enroll Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message

CERT ENROLL Messages

Error Message CERT_ENROLL-2-CERT_EN_PROGRAM_EXIT: cert_enroll daemon exiting:
[chars].
Error Message
Cisco MDS 9000 Family System Messages Reference
2-24
CDP-6-PORTDOWN: A CDP enabled port [chars] went down.
A Cisco Discovery Protocol enabled port became unoperational. The error message
Explanation
shows the Interface-ID string that identifies the port.
This is an informational message.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
CDP-6-PORTENABLE: CDP enabled on port [chars].
The Cisco Discovery Protocol was enabled on a port. The error message shows the
Explanation
Interface-ID string that identifies the port.
This is an informational message.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
CDP-6-PORTUP: A CDP enabled port [chars] came up.
Explanation A Cisco Discovery Protocol enabled port became operational. The error message shows
the Interface-ID string that identifies the port.
This is an informational message.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
The process is responsible for digital certificate enrollment exited.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).
CERT_ENROLL-3-CERT_EN_ERROR_MESSAGE: [chars].
The digital certificate enrollment process generated an error message.
Explanation
Review the error in the message to determine the next steps.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01