Bootvar-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
reason=[chars].
Error Message BOOTVAR-3-MODULE_LOCK_FAIL: Unable to get module lock, please don't
reload <error-id:[hex]
Error Message BOOTVAR-3-NEIGHBOR_REJECT_AUTOCOPY: auto-copy failed - not supported
by neighbor supervisor.
Error Message
verification failed, reason=[chars].
BOOTVAR-5
Error Message
supervisor succeed.
OL-15956-01
BOOTVAR-3-LOAD_VERIFY_LIB_FAILED: Fetching library [chars] failed,
The boot variable verification library specified failed to load.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Unable to acquire modlock to prevent user to reload during auto-sync.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Cisco MDS SAN-OS Release 3.0(1).
Deprecated
Explanation The standby supervisor does not support automatic copy. This automatic copy attempt
has failed.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
BOOTVAR-3-VERIFY_FAILED: Image [chars] for bootvar [chars]
The image set for this boot variable has failed the verification process. This is just a
Explanation
warning.
Check the reason shown in the error message to determine what action to take.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
BOOTVAR-5-AUTOCOPY_SUCCEED: auto-copy of file [chars] to standby
Automatic copy of the file succeeded. Image integrity was verified by the standby
Explanation
supervisor.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-17