HP AA979A - StorageWorks SAN Switch 2/8V Administrator's Manual page 158

IMPORTANT:
http://www.hp.com
.
switch:admin> firmwaredownload
Server Name or IP Address: 10.1.2.3
FTP User Name: JaneDoe
File Name: /pub/v5.2.x
FTP Password: xxxx
Verifying the input parameters ...
Checking system settings for firmwaredownload...
The following AP blades are installed in the system.
Slot Name
-----------------------------------------------------------------
3 FC4-16IP
4 FR4-18i
10 FR4-18i
This command will update the firmware on both CPs and all AP blade(s)
above.
please use -s option.
You can run firmwaredownloadstatus to get the status of this
command.
This command will cause a warm/non-disruptive boot on the active CP,
but will require that existing telnet, secure telnet or SSH sessions
be restarted.
Do you want to continue [Y]: y
158 Installing and maintaining firmware
At the time of this document's release, HP does not support the FC4- 1 6IP blade. Consult
for the latest, updated information.
Versions
v5.2.x_main_bld47
v5.2.x_main_bld47
v5.2.x_main_bld47
If you want to update firmware on a single CP only,
Traffic Disrupted
GigE
None
None