HP A7533A - Brocade 4Gb SAN Switch Base Release Note page 42

Closed defect summary
When FMS mode (FICON Managed Switch) is enabled, then disabled,
hafailover toggles online ports and results in traffic disruption.
The switchstatusshow command in CLI does not show correct
status when a core blade is powered off. It reports Core Blades
monitor HEALTHY.
Loss of an E_Port to a neighboring Mi10k during a zone push operation
caused zoning request to fail with Transaction Commit failed.
Reason code 2 (26) - Aca Was Rejected:Remote Switch
busy, Retry in a few seconds.
Link timeout occurs on switch port connected to any Access Gateway
during hafailover/reboot of AG switch with rlsdisable=0,
causing traffic disruption.
If Fabric Watch fwalarms is turned off and Errlog is turned on,
fabric watch daemon can crash causing a switch panic.
Evmd (Event Monitor Daemon) crash causes switch to assert/reboot
several hours after lscfg --delete when running SMI proxy client
or SMI-like interface, due to timer events being processed in the context
of a deleted logical switch.
A switch panic occurs due to third-party management application
giving bad response or no response to FCP LUN request.
SwNs table lists one fewer name server entry than the actual number
of devices (first entry shown in nsallshow CLI command)
The urouteshow command lags for several seconds while displaying
the route information. The lag is longer on products with large port
counts, such as directors
The errorshow command log still shows the original chassis name
after a chassis name change.
42
Solution
Fixed in Fabric OS 6.2.2
Workaround prior to update:
nl
Do not toggle FMS mode without
resetting the ASIC.
Fixed in Fabric OS 6.2.2
Fixed in Fabric OS 6.2.2
Fixed in Fabric OS 6.2.2
Workaround prior to update:
nl
Disable RLS as follows:
nl
Configure > system services > disable
RLS probing
Fixed in Fabric OS 6.2.2
Workaround prior to update:
nl
Disable ErrLog and Port Fencing
(using the fwconfigure command)
in the threshold alarm matrix
configuration for all port related
thresholds. This prevents the
problem-causing functions from being
called.
Fixed in Fabric OS 6.2.2
Fixed in Fabric OS 6.2.2
Fixed in Fabric OS 6.2.2
Fixed in Fabric OS 6.2.2
Fixed in Fabric OS 6.2.2