Web Tools Functionality Moved To Dcfm - HP A7533A - Brocade 4Gb SAN Switch Base Release Note

Web Tools functionality moved to DCFM

The functionality that was moved from Web Tools 6.1.1 to DCFM applies to all versions of DCFM
and also applies to Fabric OS 6.2.x.
Table 7 Web Tools functionality in DCFM
Function
Add unzoned devices
Analyze zone configura-
tion
Define device alias
Device accessibility matrix
Fabric events
Fabric summary
FCIP tunnel configuration
GigE ports interface
GigE ports route
Non-local switch ports
display in zoning tree
30
Table 7 describes these changes.
Web Tools 6.1.0
Zone Admin
Zone Admin
Zone Admin
Zone Admin
Monitor > Fabric events
Reports > Fabric summary
Port Admin Module, GigE
1
tab
Port Admin Module, GigE
tab
Port Admin Module, GigE
tab
Zone Admin
Admin Domain
Switch Admin > DCC
policies
Performance Monitoring
Configure > Zoning
Reverse Find in the zoning dialog provides the view
of the zoned and unzoned devices in the fabric if
all zone members are selected for Find.
Configure > Zoning
Reverse Find in the zoning dialog provides the view
of the zoned and unzoned devices in the fabric if
all zone members are selected for Find.
Device Tree and Topology
Connected End Devices
Custom display from the top level in the main frame
provides the device tree and topology view for all
the zoned devices if all zones are selected in the
active zone configuration.
Configure > Zoning
Configure > Zoning
The Compare dialog provides the Storage-Host and
Host-Storage view in a tree representation that is
comparable to the Device Accessibility Matrix when
all devices are selected.
Monitor > Logs > Events
Monitor > Reports > Fabric
Summary report
Configure > FCIP tunnel
Configure > FCIP tunnel
Configure > FCIP tunnel
Configure > Zoning
2
DCFM