Printing The Nozzle Check Pattern; Examining The Nozzle Check Pattern - Canon iP6700D - PIXMA Color Inkjet Printer Printing Manual

Direct printing guide
Hide thumbs Also See for iP6700D - PIXMA Color Inkjet Printer:
Table of Contents

Advertisement

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head
nozzles. Use this function when printed results are blurred or the color is incorrect.
Ensure that the inner cover is closed.
1
With the printer on, load a sheet of A4/Letter-sized paper in the printer.
2
Press the Feed Switch
the paper.
3
Print the nozzle check pattern.
(1) Press the Menu
(2) Use the
button.
(3) Use the

(6) Examining the nozzle check pattern.

See below.
Examining the Nozzle Check Pattern
Examine the nozzle check pattern output by the printer, and clean the print head when
necessary.
The nozzle check pattern will not be printed correctly if there is not enough ink.
Replace the ink tank if the remaining amount of ink is insufficient. See
"Replacing an Ink Tank" on page 48.
Feed Switch button to select the paper source in which you loaded
Feed Switch
Feed Switch
Menu button.
Menu
Menu
buttons to select Maintenance/settings
buttons to select Maintenance
(4) Use the
(5) Use the
• When all the patterns are printed normally, select All A
press the OK
The screen returns to the Maintenance
• When a white stripe exists on any of the printed patterns,
select Also B
The confirmation screen is displayed.
Select Yes
See "Print Head Cleaning" on page 54.
Maintenance/settings
Maintenance/settings
Maintenance/settings and then press the OK
Maintenance and then press the OK
Maintenance
Maintenance
buttons to select Nozzle check
and then press the OK
OK
OK button.
OK
The pattern print confirmation screen is
displayed.
buttons to select Yes
OK button.
OK
OK
OK
The nozzle check pattern is printed.
Do not open the cover while printing.
OK button.
OK
OK
Also B and press the OK
Also B
Also B
Yes and press the OK
Yes
Yes
OK button.
OK
OK
Nozzle check
Nozzle check
Nozzle check
Yes and then press the
Yes
Yes
Maintenance
Maintenance screen.
Maintenance
OK button.
OK
OK
OK
OK button to start head cleaning.
OK
OK
OK
OK
All A and
All A
All A
53

Advertisement

Table of Contents
loading

Table of Contents