Setting Up The Card Slot As The Memory Card Drive Of The Computer - Canon iP6310D - PIXMA Color Inkjet Printer Printing Manual

Direct printing guide
Hide thumbs Also See for iP6310D - PIXMA Color Inkjet Printer:
Table of Contents

Advertisement

Windows XP/Windows 2000/Windows Me: My Pictures
Windows 98: My Documents
Mac OS X v.10.2.8 or later: Pictures
Setting up the Card Slot as the Memory Card Drive of
the Computer
The card slot of the printer can also be used as the memory card drive of the computer.
To use the card slot of the printer as the memory card drive of the
computer, the printer must be connected to the computer and the
Memory Card Utility must have been installed for Windows Me/Windows
98/Windows 98 Second Edition. If the utility is not installed, install it
following the installation procedure explained in the Easy Setup
Instructions .
When OFF
photos in the memory card. After using the card slot as the memory card
drive of the computer, remove the memory card, then be sure to select
ON in the READ-ONLY MODE
ON
ON
ON
1
Ensure that both the printer and the computer are turned on, and connected
by a USB cable.
2
Press the Configuration
3
Use the
button.
4
Specify the READ
(1) Use the
- When selecting OFF
Photo data can be written into the memory card.
- When selecting ON
when printing photos.
(2) Press the OK
If you use the card slot of the printer as the memory card drive of the
computer, follow the instructions for removal of the memory card from the
computer, before removing it.
Windows: Right-click the removable disk icon and click Eject
Macintosh: Be sure to drag the
34
My Documents folder
My Documents
My Documents
Pictures
Pictures
Pictures folder
OFF is selected in the READ-ONLY MODE
OFF
OFF
READ-ONLY MODE
READ-ONLY MODE screen again.
READ-ONLY MODE
Configuration button repeatedly to select OTHERS
Configuration
Configuration
buttons to select READ
READ-ONLY MODE.
READ
READ
buttons to select a mode.
OFF, the card slot is used as the memory card drive of the computer.
OFF
OFF
ON
ON
ON, the card slot is used only for reading. Be sure to select this mode
OK button.
OK
OK
If Eject
Eject is not displayed on the screen, ensure that the
Eject
Eject
indicator lamp is not flashing and remove the memory card.
My Pictures folder
My Pictures
My Pictures
READ-ONLY MODE screen, you cannot print
READ-ONLY MODE
READ-ONLY MODE
READ-ONLY MODE and then press the OK
READ
READ
icon into the Trash
OTHERS.
OTHERS
OTHERS
OK
OK
OK
Eject.
Eject
Eject
Trash.
Trash
Trash

Advertisement

Table of Contents
loading

Table of Contents