Panasonic WV-NW502S Operating Instructions Manual page 8

y [Zoom] buttons
[x1] button: The letter "x1" will turn green and
images in the main area will be displayed at x1.
[x2] button: The letter "x2" will turn green and
images in the main area will be displayed at x2.
[x4] button: The letter "x4" will turn green and
images in the main area will be displayed at x4.
u [Brightness] buttons (*2)
[–] (darker) button: The displayed image will be
darker.
[Normal] button: The adjusted brightness will return
to the default brightness.
[+] (brighter) button: Image will be brighter.
i [AUX] buttons (*2)
[Open] button: The letters "Open" on the button will
turn green and the status of AUX connector will
be open.
[Close] button: The letters "Close" on the button
will turn green and the status of the AUX connec-
tor will be closed.
o [Rec. on SD] button (*2)
This button will be displayed only when "Manual" is
selected for "Save trigger" on the setup menu.
( page 27)
Click this button to manually record images on the
SD memory card. Refer to page 11 for descriptions
of how to manually record images on the SD memo-
ry card.
!0 [Log] button (*1)
[List] button will become available only when "On" is
selected for "Save logs" on the setup menu.
( page 32)
When this button is clicked, the log list will be dis-
played and images saved on the SD memory card
can be played.
Refer to page 15 for further information about the log
list and for how to play images on the SD memory
card.
!1 Camera title
The camera title entered for "Camera title" on the
[Basic] tab will be displayed. ( page 24)
8
!2 Alarm occurrence indication button (*2)
This button will be displayed and will blink when an
alarm has occurred. When this button is clicked, the
alarm output terminal will be reset and this button
will disappear. ( page 12)
!3 Full screen button
Images will be displayed on a full screen. To return
to the "Live" page, press the [Esc] key.
!4 One shot button
Click this button to take a picture (a still picture). The
picture will be displayed on a newly opened window.
When right-clicking on the displayed image, the pop-
up menu will be displayed. It is possible to save the
image on the PC by selecting "Save" from the dis-
played pop-up menu.
When "Print" is selected, printer output is enabled.
!5 Mic input button (*3)
Turns on/off the audio reception (hear audio from
the camera on a PC).
This button will be displayed only when "Mic input",
"Interactive(Full-duplex)" or "Interactive(Half-duplex)"
is selected for "Audio transmission/reception" on the
setup menu. ( page 51)
When this button is clicked, the button will turn into
the button and audio from the camera will not be
heard. Audio volume can be adjusted (Low/Middle/
High) by moving the volume cursor
!6 Audio output button (*3)
Turns on/off the audio transmission (play audio from
the PC on the camera speaker).
This button will be displayed only when "Audio out-
put", "Interactive(Full-duplex)" or "Interactive(Half-
duplex)" is selected for "Audio transmission/recep-
tion" on the setup menu. ( page 51)
The button will blink during the audio transmission.
When this button is clicked, the button will turn into
the button and audio from the PC will not be
heard. Audio output volume can be adjusted (Low/
Middle/High) by moving the volume cursor
.
.