Configure The Settings Relating To The Priority Stream [System] - Panasonic WV-NW502S Operating Instructions Manual

Configure the settings relating to the priority stream [System]

Click the [System] tab on the "User mng." page. ( pages 20 and 21: How to display/operate the setup menu)
The description below is the configuration of the priority stream that can transmit images without deteriorating the
image quality and refresh interval even when multiple users access concurrently.
I Priority stream
[Activation]
Select "On" or "Off" to determine whether or not to use
the priority stream.
Default: Off
Note:
• When "On" is selected for "Activation" of "Priority
stream", number of users who can access the cam-
era will be limited.
[Destination IP address(1)]
Enter the first destination IP address.
[Destination IP address(2)]
Enter the second destination IP address.
[Stream type]
Select either "JPEG", "H.264/MPEG-4(1)" or "H.264/
MPEG-4(2)".
JPEG: JPEG images will be transmitted.
H.264/MPEG-4(1): H.264 (1) (or MPEG-4(1)) images
will be transmitted.
H.264/MPEG-4(2): H.264 (2) (or MPEG-4(2)) images
will be transmitted.
Default: JPEG
Note:
• "JPEG" is available only when "1.3 mega pixel" is
selected for "Image capture mode".
68
[Refresh interval*]
Select the refresh interval from the following.
This setting is validated only when "JPEG" is selected
for "Stream type".
0.1fps/0.2fps/0.33fps/0.5fps/1fps/2fps/3fps/5fps/6fps/
10fps/15fps */30fps *
Default: 1fps
Note:
• When "On" is selected for "H.264 (or MPEG-4)
transmission", the transmission interval may be
longer than the set value when any value with an
asterisk (*) on the right is selected.
[Image capture size]
Select the image capture size from the following.
This setting is validated only when "JPEG" is selected
for "Stream type".
QVGA/VGA/1280x960
Default: 1280x960