Emission Data; Description - Echo CS-300, CS-340, CS-345 Instruction Manual

EMISSION CONTROL
EPA Phase II
The emission control system for these engines are
EM (Engine Modification).
An Emission Control Label is located on the
engine. (This is an EXAMPLE ONLY, information on
label varies by engine FAMILY).
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying
the engine emissions output meets applicable California and/or U.S. EPA emissions regulations, provided
that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging
restrictions, guide bar and saw chain installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or
missing parts. Use the contents list to check for missing parts.
CONTENTS
1 - Power Head
1 - Guide Bar
1 - Saw Chain
1 - Instruction Manual
1 - Safety Manual
1 - Warranty Registration Card
1 - Limited Warranty Statement
1 - Kick Guard Installation Manual
1 - Scrench
TM
1 - Echo Power Blend

EMISSION DATA

PRODUCT EMISSION DURABILITY

DESCRIPTION

2-stroke oil sample
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 2EXHS.0334RA
DISPLACEMENT: 33.4
THIS ENGINE MEETS U.S. EPA PAHSE II EMISSION REGULA-
TIONS FOR S.O.R.E. REFER TO OWNER'S MANUAL FOR
MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
EMISSION COMPLIANCE PERIOD : 300 HRS.
5
CC