Dell PowerVault MD1120 Getting Started Manual page 12
Getting started guide: english, simplified chinese, german, greek, polish, russian, turkish, spanish, and hebrew
Hide thumbs
Also See for PowerVault MD1120:
- Installation manual (102 pages) ,
- Hardware owner's manual (72 pages) ,
- Getting started manual (53 pages)
Table of Contents
Advertisement
Available languages
Available languages
Back-Panel Connectors
SAS connectors (per EMM)
Serial connector (per EMM)
LED Indicators
Front panel
Hard-drive carrier
EMM
Power supply/cooling fan module
Power Supplies
Wattage
Heat dissipation
Voltage
Frequency
Amperage
10
Getting Started With Your System
• One SAS (SFF 8470) "IN" connector
for connection to the host
• One SAS (SFF 8470) "OUT"
connector for expansion to an
additional enclosure
One 6-pin UART mini-DIN connector
(for factory use only)
• One two-color LED indicator
for system status
• Two single-color LED indicators
for power and split mode
• One single-color activity LED
• One two-color LED status indicator
per drive
Three two-color LED status indicators,
one each for the two EMM SAS ports
and one for the EMM status
Three LED status indicators for power
supply status, power supply/fan fault,
and AC status
485 W maximum continuous; 604 W peak
200 W
100–240 V
50/60 Hz
7.5–3.75 A
Advertisement
Table of Contents
