Table of Contents
Advertisement
A
SSEMBLY
CONVERTING BLOWER TO YARD SHIELD
(
)
PB-200
SYSTEM
1. Turn blower pipes counter clockwise to remove from blower.
2. Attach hose guides (A) to each of the two holes on PB-200
handle. Secure hose guides by pushing thumb snaps into place.
3. Align grooves in Yard Shield pipe with pegs on blower housing
and slide Yard Shield pipe onto housing. Twist pipe clockwise to
lock into place. Assure clear hose runs along top of pipe.
Tip: For best results, do not use Yard Shield pipe for blower-only
application.
4. Route supply hose through hose guides, toward back of blower.
5. Attach hose to tank hose at quick disconnect valve.
ECHO Y
S
ARD
I
NSTRUCTION
A
S
HIELD
YSTEM
M
ANUAL
A
5
Advertisement
Table of Contents
