Maintenance Schedule; How To Order Repair Parts - Chamberlain MH Owner's Manual

ITEM
Drive Chain
Sprockets
Clutch
Belt
Fasteners
Manual Disconnect
Bearings & Shafts
WARNING
✳ Use SAE 30 Oil (Never use grease or
CAUTION
silicone spray).
✔ Repeat ALL procedures.
■ Do not lubricate motor. Motor bearings are
rated for continuous operation.
■ Do not lubricate clutch or V-belt.
■ Inspect and service whenever a malfunction is observed or suspected.

MAINTENANCE SCHEDULE

Check at the intervals listed in the following chart.
PROCEDURE
Check for excessive slack.
Check & adjust as required.
Lubricate.*
Check set screw tightness
Check & adjust as required
Check condition & tension
Check & tighten as required
Check & Operate
Check for wear & lubricate

HOW TO ORDER REPAIR PARTS

OUR LARGE SERVICE ORGANIZATION SPANS AMERICA
Installation and service information is available
CALL OUR TOLL FREE number:
WHEN ORDERING REPAIR PARTS
PLEASE SUPPLY THE FOLLOWING INFORMATION:
PART NUMBER DESCRIPTION MODEL NUMBER
ADDRESS ORDER TO:
THE CHAMBERLAIN GROUP, INC.
Technical Support Center
6020 S. Country Club
Tucson, AZ 85706
EVERY
3 MONTHS
●
●
●
To avoid SERIOUS PERSONAL INJURY or DEATH from
electrocution, disconnect ALL electric power BEFORE
performing ANY maintenance.
1-800-528-2806
11
EVERY EVERY
6 MONTHS 12 MONTHS
✔
✔
● ✔
● ✔
● ✔
● ✔
✔
WARNING
WARNING